Once the oak parquet blocks had been fitted in the study, we moved on to the living room. This was to be the mirror (in materials) to the study; a walnut floor with a oak trim in the border. The larger the room the more important that your first line is straight, as any problems can be magnified as the blocks are fitted out across the room. We fit across the line where the border will be, then use a saw on a rail to cut the border. The oak trim is glued and pinned to the side and then the rest of the border in walnut is added. Once everything is down all that's required is a careful sand and seal. Darker woods are more likely to show up any sanding errors so extra care is taken with the final rotary stages of sanding. This floor was then sealed with a satin water based polyurethane lacquer, but oiling the floor would also have been an option.
Wednesday, 19 May 2010
Thursday, 6 May 2010
Rustic Oak Herringbone Parquet
This floor is in the study of a house in Surrey. The client is having two rooms fitted with herringbone pattern parquet blocks, which need to be glued down, then sanded and sealed. The study is in oak and the living room is to be in walnut. Both are a natural grade so there is a lot of interesting variations in the grain, pattern and tone. The pictures here show the study more or less complete. We fitted a 5mm walnut inlay into the border in this room. The walnut floor will have a 5mm oak inlay. Both rooms will be sealed with three coats of clear, satin lacquer.
Welcome to Acacia Wooden Floors
Hi there
I have started this blog for three reasons. The first is to profile my work, so that potential customers can see what I can do, can see the quality of my work and potentially get some ideas for their own projects. The second is to generate discussion about wooden flooring, which will hopefully help to drive standards up and educate the consumer about minimum standards. I'm also always keen to learn new tricks or hear about new products. The third, and probably most important for me, is to help promote my own business. A well visited, informative and interesting blog will hopefully drive more traffic to my website, which in turn will generate paying customers.
I have started this blog for three reasons. The first is to profile my work, so that potential customers can see what I can do, can see the quality of my work and potentially get some ideas for their own projects. The second is to generate discussion about wooden flooring, which will hopefully help to drive standards up and educate the consumer about minimum standards. I'm also always keen to learn new tricks or hear about new products. The third, and probably most important for me, is to help promote my own business. A well visited, informative and interesting blog will hopefully drive more traffic to my website, which in turn will generate paying customers.
Subscribe to:
Posts (Atom)